The Сalibration Service (CS) of "UKRMETRTESTSTANDART" operates in accordance with DSTU EN ISO/IEC 17025 and DSTU ISO 17034 with regard to:

• calibration;
• production of reference materials and certified reference materials;
• measurements;
• development, modification, verification, validation of methods.

The CS of SE "UKRMETRTESTSTANDART" performs calibrations, in particular, calibrations of measurement standards and measuring instruments in the production facilities of the SE "UKRMETRTESTSTANDART", address: 4 Metrolohichna St., Kyiv, at the place of operation of customers' measuring instruments (in remote locations), at temporary workplaces and in mobile laboratories for the following types of measurements:

• AUV - acoustics, ultrasound, vibration;
• EM - electricity and magnetism;
• L - length;
• M - mass and related quantities;
• PR - photometry;
• QM - chemistry (amount of substance);
• RI - ionizing radiation;
• T - thermometry;
• TF - time and frequency.

As a Scientific Metrology Centre of Ukraine, the scope of activities of the SE "UKRMETRTESTSTANDART" includes the creation of conditions for the mutual recognition of calibration and measurement results at the international level in order to implement Ukraine's obligations under the International Agreement on Mutual Recognition of National Measurement Standards, Calibration and Measurement Certificates issued by National Metrology Institutes (MRA). The SE "UKRMETRTESTSTANDART" is granted the right to use the CIPM MRA logo on its calibration and measurement certificates issued in accordance with the CMC lines published in the Key Comparison Database (KCDB) of the International Bureau of Weights and Measures (BIPM), Authorization for use of the CIPM MRA Logo. 
The SE "UKRMETRTESTSTANDART" develops, maintains, researches and improves national measurement standards to ensure uniformity of measurement and metrological traceability of measurement results to the International System of Units (SI) by direct or indirect comparison with national or international measurement standards. 
The scope of activities of the CS is covered by the Management System and is performed in accordance with the requirements of DSTU EN ISO/IEC 17025 and DSTU ISO 17034; with the legal requirements of the Laws of Ukraine: "On Metrology and Metrological Activities", "On Technical Regulations and Conformity Assessment", "On Standardisation", "On General Safety of Non-Food Products" and, in particular, with the basic principles of DSTU EN ISO 9001, as well as with reference and guiding documents of international and national organisations in the field of accreditation.
Additional requirements for the activities of the CS of SE "UKRMETRTESTSTANDART" may be established by agreements with customers, which should not be in conflict with the requirements of DSTU EN ISO/IEC 17025 and DSTU ISO 17034.